Please post your name here if attending the meet

[ARCTIC]

Derek smith hope to be there both days. I wonder if anyone can point me in the right direction as to sorting my heated seats out. Switch lights up but no heat in both seats.

Hi Derek.
Most likely the seat elements have broken, of the plugs under the seat are not attached, if you seek out Rob (trebor) he would be able to advise you about how he sorted his out.

[Bermudan 75]

I should be there on the Saturday but without the 75, should be ready for the May meet though.

[Bernard]

Because my steam rail outing has been cancelled for Saturday, I've swapped my original nano day from Sunday to take its place.

[Duncan]

I might have to bin off one day unfortunately. May need to be fixing a tap in MiLs house. It depends a bit on the arrival of a tool via ebay beiieve it or not.

[Duncan]

I might have to bin off one day unfortunately. May need to be fixing a tap in MiLs house. It depends a bit on the arrival of a tool via ebay beiieve it or not.

Sorry. Looks like I can't make Saturday. Still plan to be there Sunday, but no T4. Will be great to catch up, and tell you all about what's been going on!

[Rob]

Ok Duncan it will be good to catch up , hopefully Rob Woolleysox will be there on Sundayb

[ARCTIC]

I might have to bin off one day unfortunately. May need to be fixing a tap in MiLs house. It depends a bit on the arrival of a tool via ebay beiieve it or not.

Sorry. Looks like I can't make Saturday. Still plan to be there Sunday, but no T4. Will be great to catch up, and tell you all about what's been going on!

Hi Duncan.
i was going to say if it is one of these tools you need to help change the tap i could have brought them with me, hopefully the tool has arrived so you can carry out the work.
1

2

used to reach those hard to turn tap nuts under the sink and basin.

[Duncan]

I might have to bin off one day unfortunately. May need to be fixing a tap in MiLs house. It depends a bit on the arrival of a tool via ebay beiieve it or not.

Sorry. Looks like I can't make Saturday. Still plan to be there Sunday, but no T4. Will be great to catch up, and tell you all about what's been going on!

Hi Duncan.
i was going to say if it is one of these tools you need to help change the tap i could have brought them with me, hopefully the tool has arrived so you can carry out the work.
1

2

used to reach those hard to turn tap nuts under the sink and basin.

Thanks for the offer. I'm planning just to fit a new cartridge / gland if I can get away with it.

[AndyN01]

Damn Parkside - Lidl - German engineering.

It took fresh fuel and two, yes TWO, pulls on the cord for the generator to fire up as a check for tomorrow's meeting.

Considering it hasn't been touched since draining down after the last Nano last year I reckon that's impressive.

See you tomorrow.

Andy.

Sadly I haven't been able to borrow the big gazebo this time so we'll all have at least another hour of socialising rather than trying to work out how to put it up

[Bermudan 75]

Can't make it I am afraid, my good lady has double booked. The car is required for her to attend something called a hairdresser.