by Rob » Mon Apr 16, 2018 11:05 pm
Hi Scott, I have an off switch connected to my keyfob but you could just as easily fit a switch in the car if you wanted too.
The FBH uses pin 1 to come on when the ambient temp is right and with the engine running so I have connected to that so i can turn it off if i wish too .
Did mine because say you go on a short journey on a cold day to say get some fuel, the FBH comes on as normal in its supplementary heater mode but as soon as you get to the garage and turn the ignition off it will go off and ramp down after a couple of minutes, meantime you have fuelled up got back in the car and started the ignition so on it comes again and has to go through its initial purge before ramping back up, in those circumstances and on short journeys I dont want it switching on and then off and then on so can disable it with the switch.
You need an LED inside the car though which will go off when you switch the FBH off just to give you the assurance that it has gone off as with engine running difficult to hear, my led is mounted inside the central light unit
Nano Meets,
" You do the work , we supply the expertise "
Robs Pictures at:
Robs Car Gallery