Jobs to be done and offers of help here please

[jubbarelly]

Hi all,

I've got some powerfolds to fit, but do have the door looms so just need a hand with getting the doors off and back on again lol.

Cheers
Jub


Sent from my iPad using Tapatalk

[Kiltman]

Possibly fitting my Harman Kardon and rear blind but if not happy to provide help, e.g. Bumpers off (mine's been off more times than a whore's drawers!), helping Arctic with compensators, spy hole mods, bonnet blocks etc.

[chiron_myth]

If you're doing your rear blind, I may be forced to watch so that I have a clue how to do mine!

[Zeeblum]

Hi there,

If I could grab a t4 session that would be great.

I have a leak in the boot dripping down above the light, any feedback welcomed.

Lastly, usually in third and forth when I put my foot down the car seems to get to about 2500 revs then the revs shoot up on there own......Mind boggling.

And of course I am very happy to help where I can.

Still would like that t4 session.

Leak in the boot fixed - It was leaking from the trim clips and the clips just below the rear light glass and the inner sides of the boot. My car is filled with window putty, What the ****! Not any more. I took a flat head screw driver and went at the car with gay abandon. Then filled the spot weld sheets with something much more appropriate.

The rev issue is most likely a failing clutch I don't expect to sort that at the meet

I'll be on hand to help

Cheers
Zeeblum

[stevenicks]

I am looking to have a new Air-Con condenser fitted at the nano. Would anyone have any PAG oil that I would be able to use.Alternatively I could purchase it from ebay but it would seem a waste if I am probably only going to use it the once.

Thanks

Steve

[CimmaronG]

Hi all,

I've got some powerfolds to fit, but do have the door looms so just need a hand with getting the doors off and back on again lol.

Cheers
Jub


Sent from my iPad using Tapatalk

I'll be there Saturday if you need a hand

Nige
CimmaronG

[Duncan]

I am looking to have a new Air-Con condenser fitted at the nano. Would anyone have any PAG oil that I would be able to use.Alternatively I could purchase it from ebay but it would seem a waste if I am probably only going to use it the once.

Thanks

Steve

I'm sure someone will be able to advise about removing the bumper which will be the main part of the job. I assume you will have had the refrigerant removed before you come though.

[stevenicks]

Because it had a leak I was informed by the garage that it was completely empty. I have now purchased PAG oil.
Thanks.

[Duncan]

Because it had a leak I was informed by the garage that it was completely empty. I have now purchased PAG oil.
Thanks.

That's good then. I thought I'd check as venting it to atomsphere is breaking some rules.

[victorgte]

Hope to get my CD changer working.