Jobs to be done and offers of help here please

[sewerman]

Lol know the feeling. My advice would be to get some door card trim clips a few quid of eBay, try BMW door clips too found these cheaper presumably cus the 75 is out of manufacture!

And a 6" ruler to try and get the door ovals off, if your lucky

[olik]

My 75 Classic 03 CDT SE Auto saloon currently has the Harmony sound system.

I've got a Symphony with CD unit + the correct loom for it.
Thought it might be an easy upgrade…..

Am a little wiser now: )
Took a week to realise there were 7 Torx screws to remove the glove locker….
I bought the workshop manual to discover this.

After advice I now believe the ash-tray unit (Console as well?) has to come out to access the loom connections, but I'm not sure enough to try it without some more advice.

Would this be a sensible job for the meet?

I'm looking to attend Friday & Saturday nights camp.
Looking for a suitable tent currently: )

Not sure I will be much use as a mechanic, but maybe I should just bring some extra beer; )

John.

[Paul]

Took a week to realise there were 7 Torx screws to remove the glove locker….
I bought the workshop manual to discover this.

After advice I now believe the ash-tray unit (Console as well?) has to come out to access the loom connections, but I'm not sure enough to try it without some more advice.

Would this be a sensible job for the meet?

I can help you with that John.

[olik]

Took a week to realise there were 7 Torx screws to remove the glove locker….
I bought the workshop manual to discover this.

After advice I now believe the ash-tray unit (Console as well?) has to come out to access the loom connections, but I'm not sure enough to try it without some more advice.

Would this be a sensible job for the meet?

I can help you with that John.

Thanks Paul: )
I don't who's who yet, but I look forward to rectifying that next month....

John.
(In Gloucester: )

[jamie]

Could also do with a hand fitting headlight washers . Picked all the bits up off Mischief the weekend, ZCS coding was changed to allow them to work properly last nano, also going to be changing my throttle body over to a 190

[chiron_myth]

Few jobs for me please...

- I'd like a hand to remove the bumper. I've got some DRL's and double horn to fit. I can do the wiring but will need a hand with the bumper, and maybe a hand to figure out how best to fit the DRL's.
- I've got a rear electric blind to fit. I've got a guide from the OC website, but any guidance would be much appreciated.
- Fit the rear light cluster panels I've had my garage for the last 3 months. Again, people on stand-by are appreciated.
- Also a T4 please if possible.

Thanks

John

[theridler]

Hi Jamie - IIRC you're got a mk1? Although mine is mk2 still can give you a hand...

Could also do with a hand fitting headlight washers . Picked all the bits up off Mischief the weekend, ZCS coding was changed to allow them to work properly last nano, also going to be changing my throttle body over to a 190

[jamie]

Hi Jamie - IIRC you're got a mk1? Although mine is mk2 still can give you a hand...

Could also do with a hand fitting headlight washers . Picked all the bits up off Mischief the weekend, ZCS coding was changed to allow them to work properly last nano, also going to be changing my throttle body over to a 190

Yeah its a MK1 and cheers

[theridler]

Can help with bumper (I'll be removing mine which I've done a few times now...)

Few jobs for me please...

- I'd like a hand to remove the bumper. I've got some DRL's and double horn to fit. I can do the wiring but will need a hand with the bumper, and maybe a hand to figure out how best to fit the DRL's.
- I've got a rear electric blind to fit. I've got a guide from the OC website, but any guidance would be much appreciated.
- Fit the rear light cluster panels I've had my garage for the last 3 months. Again, people on stand-by are appreciated.
- Also a T4 please if possible.

Thanks

John

[chiron_myth]

Can help with bumper (I'll be removing mine which I've done a few times now...)

Few jobs for me please...

- I'd like a hand to remove the bumper. I've got some DRL's and double horn to fit. I can do the wiring but will need a hand with the bumper, and maybe a hand to figure out how best to fit the DRL's.
- I've got a rear electric blind to fit. I've got a guide from the OC website, but any guidance would be much appreciated.
- Fit the rear light cluster panels I've had my garage for the last 3 months. Again, people on stand-by are appreciated.
- Also a T4 please if possible.

Thanks

John

That'd be great, thanks.