Page 2 of 2

Re: Please post jobs required and any offfers of help here

PostPosted: Fri May 24, 2024 6:00 pm
by Roderick87
Thwarted. Sorry, after all the expectation, I shall have to drop out of tomorrows meet. I note there is one on 29 June, but that will be my Birthday so can't really say if that will be possible either! Oh well July?
Hope you all have good weather and a productive day!
Ray

Re: Please post jobs required and any offfers of help here

PostPosted: Fri May 24, 2024 6:54 pm
by daveo138
Duncan wrote:
daveo138 wrote:Just wondering if T4 could help diagnose my cruise control problem?


It should be able to. Though most often it's the clutch switch after a clutch master cylinder change.


We can rule out the clutch switch, as it’s an auto.

The brake pedal switch appears to be seated correctly and the brake lights work, although there is more than one output from the switch, obviously, so I can’t say for certain that it works.

I think I’ve eliminated the clock spring and steering wheel switches, as well as the cruise ECU, but now I’m stuck.

:help:

Re: Please post jobs required and any offfers of help here

PostPosted: Fri May 24, 2024 8:14 pm
by Duncan
daveo138 wrote:
Duncan wrote:
daveo138 wrote:Just wondering if T4 could help diagnose my cruise control problem?


It should be able to. Though most often it's the clutch switch after a clutch master cylinder change.


We can rule out the clutch switch, as it’s an auto.

The brake pedal switch appears to be seated correctly and the brake lights work, although there is more than one output from the switch, obviously, so I can’t say for certain that it works.

I think I’ve eliminated the clock spring and steering wheel switches, as well as the cruise ECU, but now I’m stuck.

:help:


OK, book yourself in on the T4 list and we will see what we can see. Did it ever work?

Re: Please post jobs required and any offfers of help here

PostPosted: Fri May 24, 2024 8:57 pm
by daveo138
Duncan wrote:
daveo138 wrote:
Duncan wrote:
daveo138 wrote:Just wondering if T4 could help diagnose my cruise control problem?


It should be able to. Though most often it's the clutch switch after a clutch master cylinder change.


We can rule out the clutch switch, as it’s an auto.

The brake pedal switch appears to be seated correctly and the brake lights work, although there is more than one output from the switch, obviously, so I can’t say for certain that it works.

I think I’ve eliminated the clock spring and steering wheel switches, as well as the cruise ECU, but now I’m stuck.

:help:


OK, book yourself in on the T4 list and we will see what we can see. Did it ever work?


Yes, it was previously working fine. I noticed it had stopped working when I was heading down to the National event at Gaydon.